A Malaysia-based industrial finishing company headquartered in Ulu Tiram, Johor Bahru, delivering quality coating services tailored to the diverse and specific needs of our clients.
About Us
Anchor Creation Sdn Bhd is a Malaysia-based industrial finishing company headquartered in Ulu Tiram, Johor Bahru. Since our establishment on 19 June 1999, we have built a steadfast reputation in the surface finishing industry, delivering quality coating services tailored to the diverse and specific needs of our clients.
Over the course of more than two decades, we have worked across a wide range of projects, accumulating deep expertise and a thorough understanding of what it takes to get the job done right. From powder coating and wet paint to Teflon coating, silkscreen printing, and beyond, our comprehensive suite of coating solutions ensures that every client finds exactly what they need — both economically and aesthetically. We don't just coat products. We protect them, elevate them, and ensure they leave our facility ready to represent your brand at its best.
At Anchor Creation, we believe that great work is built on trust, precision, and open communication. Whether you are a long-standing partner or exploring our services for the first time, our team is always ready to listen, advise, and deliver.
Reach out to our team today and let us find the right finishing solution for you.
Quality Inspection
At Anchor Creation, quality is never an afterthought. Every finished product undergoes a comprehensive series of inspection tests to verify coating adhesion, durability, appearance, and consistency - ensuring that what leaves our facility is a masterpiece you'd be proud of.
This test is essential in determining the quality of bonding between the metal surface and its coating. A cross-cut of 1 mm2 over 100 squares is made on the coated surface, after which Nichiban or Nitto 100 tape is applied over the cross-cut area and removed with a quick pull action. Should any paint adhere to the tape upon removal, poor adhesion is indicated - and the product does not pass this stage.
Surface glossiness is measured by directing a known amount of light at the coated surface and quantifying its reflectance. As a standard, gloss is measured at a 60 degree angle, or at a 20 degree angle for high-gloss finishes. To ensure the accuracy of every reading, all equipment is calibrated prior to each measurement taken.
This test evaluates the scratch hardness of a coated surface. A pencil is applied at a 45 degree angle to the surface under a constant pressure of 7.5 Newtons (765 g), beginning with the hardest lead and progressing through softer grades. The hardness grade of the pencil that first causes visible damage to the surface is recorded as the scratch hardness value.
Colour accuracy is verified by measuring the colour values L*, a*, and b* against a Master Colour Plate reference. A Delta E reading of 1 or below confirms that the colour of the finished product falls within acceptable specifications, ensuring visual consistency across all units produced.
Coating thickness is measured in accordance with internationally recognised standards - ISO 2178 for ferrous materials and ISO 2360 for non-ferrous materials. This ensures that each product carries the correct coating thickness as required for both performance and compliance.
A cotton cloth saturated with isopropyl alcohol (IPA) is rubbed against the coated surface using a 1 kg pressure tool. This test determines whether the product has been sufficiently cured and whether the paint has properly adhered to the surface - serving as a reliable final check before products are cleared for delivery.
Powder Coating Malaysia, Spray Painting, Silkscreen
12, Jalan Desa Tropika 1, Taman Perindustrian Tropika, 81800 Ulu Tiram, Johor Bahru, Malaysia.